Color enlarger for all film formats up to 6 x 9 cm (2.4 x 3.5 in.) and lenses up to 105 mm focal length. Also
Color enlarger for all film formats up to 6 x 9 cm (2.4 x 3.5 in.) and lenses up to 105 mm focal length. Also suitable for processing of variable gradation papers (e.g. Multigrade ®) and graded black-and-white papers.
Compound negative carrier fitted with Anti-Newton glass on top and flat glass on bottom, additional format mask 6 x 7 cm.
Focusing with additional fine drive. Height adjustment with weight compensation by a roll-off spring mechanism.
Filter holder for square filters and framed Multigrade® filters, can be swung out and adjusted in height, with diffusor plate for integral metering.
Baseboard (WxDxH): approx. 600 x 500 x 32 mm (23.6 x 19.7 x 1.3 in.)
Color Enlargers SYSTEM-V
Color mixing head with dichroic interference filters, calibrated in densitometric values up to 180. Dials are indirectly illuminated. Whitelight lever for simultaneous swinging in or out of filters, with control light. Continuously adjustable density aperture up to 60 densitometric densities (= two aperture settings). Best possible light distribution due to special diffusor plate and exchangeable double condensor system. UV and IR filters. Filter drawer.
Removable compound negative carrier with interchangeable inserts, adjustable masking strips, adjustable film stops and grid pins. Lens stage with spirit level and red filter, tiltable for distortion correction on Scheimpflug principle. Quick change attachment for lenses. Height adjustment by hand-crank operated friction drive on plastic bearings. Wall and floor projection possible.
May only be operated with transformer K4453.
Wide, vibration-resistant column of embossed aluminium tubing, with dull black anodized surface, cm and inch scales and markings for enlarging scales. Matt-gray laminated baseboard with individually height-adjustable feet. Spirit level on column base.
Lamp: Halogen cold light mirror lamp, 12 V, 100 W, socket GZ 6,35
Cord: approx. 1,80 m (6 ft.)
Filter drawer: 85 x 85 mm (3.3 x 3.3 in.)
Column (HxWxD): approx. 1000 x 70 x 35 mm (39.4 x 2.8 x 1.4 in.)
Distance between optical axis and column base: approx. 220 mm (8.7 in.)
Can be converted into a copy stand or a slide duplicator.
Scope of supply: Incl. compound negative carrier, lamp, two lens holder rings and dust hood, without lens, without transformer.
(Replacement lamp: K4459)
This product is marketed for the purpose of illumination for image capture. It is not intended for household lighting.
** Note; Where applicable - All Kaiser items supplied with UK plug.