The column is made of special matt black anodized aluminium multi-section tubing, with cm and inch scales. The camera carrier is made of aluminium section
The column is made of special matt black anodized aluminium multi-section tubing, with cm and inch scales. The camera carrier is made of aluminium section and can be horizontally adjusted over approx. 16 cm (6.3 in.) with rack-and-pinion parallel guides. It has left hand/right hand operation with two blocking screws that prevent inadvertent changing of the adjusted position. The camera mounting plate is tiltable by ± 90°. Connecting screw horizontally adjustable. Height adjustmentis motorised. Large non-reflecting matt grey base plate with printed grid, cm and inch scales, with feet that are adjustable in height.
•* Base plate (WxHxD): 680 x 38 x 570 mm (26.8 x 1.5 x 22.4 in.)
•* Height of column: 1.20 m (3.9 ft.)
•* Column cross section: 105 x 74 mm (4.1 x 2.9 in.)
•* Loading capacity: 8 kg (17.6 lbs.)
•* Camera mounting plate: 130 x 78 mm (5.1 x 3.1 in.)
•* Reversing mounting thread: 1/4” / 3/8” changeable
•* Motorised height adjustment, with two speeds.
•* Cable remote controlled.
•* Constant adjustment speed, independent of load.
•* Automatic end switch by photo sensors.
•* Built in spirit level
Recommended lighting systems for the RD System copy stands are RB 5070 DX and the copy lighting units of the R1 system.
** Note; Where applicable - All Kaiser items supplied with UK plug.