Currency
Show prices
Inc. VAT
Ex. VAT
Kaiser RSP Xtra Copy Stand. - Fotospeed
Kaiser RSP Xtra Copy Stand.
Heavy-Duty
Copy Stand
Kaiser K5711 RSP Xtra Copy Stand
A heavy-duty copy stand for digital and analogue image capturing work, combining a highly rigid floor-standing column with motor-driven camera-carrier height adjustment. The K5711 provides two travel speeds, precise position holding and extensive horizontal and angular camera adjustment. Its cast aluminium camera carrier supports loads of up to 15 kg, while the motorised vertical drive and fine positioning controls provide flexible adjustment for substantial reproduction camera setups.
Motorised height adjustment
The camera carrier is moved vertically by a motorised drive with two travel speeds that remain independent of the applied load.
Precise position holding
A self-limiting worm gear holds the selected camera height exactly once movement stops.
15 kg maximum load
The cast aluminium camera carrier supports loads of up to 15 kg for substantial reproduction camera setups.
Motorised vertical control
Controlled movement at two speeds
The K5711 camera carrier uses motorised height adjustment with two travel speeds. Kaiser specifies that these speeds remain independent of the applied load, helping provide consistent vertical movement across different camera configurations.
A self-limiting worm gear holds any selected height position exactly, while automatic end switching is controlled by magnetic sensors. Operation is handled using the supplied cable remote control.
Control features
Motorised camera-carrier movement
Two
travel speeds
Speed
independent of load
Self-limiting worm gear
Automatic magnetic end switch
Cable
remote control
Camera carrier
Horizontal and angular adjustment
Horizontal adjustment
The cast aluminium camera carrier moves horizontally on specially shaped parallel guides using a gear rack and hand cranks for right- or left-hand operation.
±90° camera platform
The 13 × 13 cm camera mounting plate can be swivelled through ±90° and incorporates high-precision fine adjustment.
Secure alignment
Two blocking screws secure the horizontal position, while a built-in spirit level assists with accurate camera alignment.
Heavy-duty construction
Stable floor-standing support
Multi-section special extrusion
Extremely sturdy black-anodised column with printed centimetre and inch
scales.
Double-strutted steel-tube foot
Provides the main structural support for the floor-standing column.
Cast
aluminium column base
Designed for securely bolting the column to the supporting foot.
Levelling system
Built-in spirit level and four levelling feet assist with accurate
installation.
K5711
Technical specification
Total height
227 cm / 89.4
in.
Column
cross-section
12 × 8 cm / 4.7 × 3.1
in.
Maximum load
15 kg / 33
lbs.
Camera
platform
13 × 13 cm / 5.1 × 5.1
in.
Connecting
thread
Interchangeable 3/8
in. / 1/4 in.
Required floor
space
83 × 140 cm / 32.7 ×
55.1 in.
Important
The K5711 is supplied without a base board. Kaiser specifies that it is intended for use with the K5712 Table for Copying Works, K5630 Table, or suitable custom-made devices.
SKU
CODE:K5711
Heavy-Duty
Copy Stand
Kaiser K5711 RSP Xtra Copy Stand
A heavy-duty copy stand for digital and analogue image capturing work, combining a highly rigid floor-standing column with motor-driven camera-carrier height adjustment. The K5711 provides two travel speeds, precise position holding and extensive horizontal and angular camera adjustment. Its cast aluminium camera carrier supports loads of up to 15 kg, while the motorised vertical drive and fine positioning controls provide flexible adjustment for substantial reproduction camera setups.
Motorised height adjustment
The camera carrier is moved vertically by a motorised drive with two travel speeds that remain independent of the applied load.
Precise position holding
A self-limiting worm gear holds the selected camera height exactly once movement stops.
15 kg maximum load
The cast aluminium camera carrier supports loads of up to 15 kg for substantial reproduction camera setups.
Motorised vertical control
Controlled movement at two speeds
The K5711 camera carrier uses motorised height adjustment with two travel speeds. Kaiser specifies that these speeds remain independent of the applied load, helping provide consistent vertical movement across different camera configurations.
A self-limiting worm gear holds any selected height position exactly, while automatic end switching is controlled by magnetic sensors. Operation is handled using the supplied cable remote control.
Control features
Motorised camera-carrier movement
Two
travel speeds
Speed
independent of load
Self-limiting worm gear
Automatic magnetic end switch
Cable
remote control
Camera carrier
Horizontal and angular adjustment
Horizontal adjustment
The cast aluminium camera carrier moves horizontally on specially shaped parallel guides using a gear rack and hand cranks for right- or left-hand operation.
±90° camera platform
The 13 × 13 cm camera mounting plate can be swivelled through ±90° and incorporates high-precision fine adjustment.
Secure alignment
Two blocking screws secure the horizontal position, while a built-in spirit level assists with accurate camera alignment.
Heavy-duty construction
Stable floor-standing support
Multi-section special extrusion
Extremely sturdy black-anodised column with printed centimetre and inch
scales.
Double-strutted steel-tube foot
Provides the main structural support for the floor-standing column.
Cast
aluminium column base
Designed for securely bolting the column to the supporting foot.
Levelling system
Built-in spirit level and four levelling feet assist with accurate
installation.
K5711
Technical specification
Total height
227 cm / 89.4
in.
Column
cross-section
12 × 8 cm / 4.7 × 3.1
in.
Maximum load
15 kg / 33
lbs.
Camera
platform
13 × 13 cm / 5.1 × 5.1
in.
Connecting
thread
Interchangeable 3/8
in. / 1/4 in.
Required floor
space
83 × 140 cm / 32.7 ×
55.1 in.
Important
The K5711 is supplied without a base board. Kaiser specifies that it is intended for use with the K5712 Table for Copying Works, K5630 Table, or suitable custom-made devices.
Delivery Information
At Fotospeed, we aim to dispatch your order quickly and safely, so your products arrive when you need them.
 Fast DispatchOrder before 3pm for same-day dispatch on in-stock items. |
 Secure PackagingCarefully packed to help your products arrive in perfect condition. |
 Worldwide DeliveryShipping across the UK and to destinations around the world. |
UK DeliveryOrders placed before 3:00pm, Monday to Friday are dispatched the same day where items are in stock. UK Mainland orders are sent on a next working day service from £6.99. Please note that next working day delivery applies to in-stock items only and, while we work closely with our couriers, delivery times cannot always be guaranteed. We work with the following trusted courier partners to ensure your order is delivered safely and efficiently. The courier used will depend on the size, weight and destination of your order. Once your order has been dispatched, tracking information will be provided where available. Our Courier Partners
|
International DeliveryWe ship to a wide range of international destinations. Delivery prices vary depending on your country, order size and parcel weight. For the latest international delivery prices, please visit our full delivery information page. View Delivery PricesIf your country is not listed, please contact our team and we'll be happy to help. |
Need Help?
If you have a delivery question or need your order urgently, please get in touch before placing your order.
 |
 |
Returns
If you would like to return an item, please visit our returns page to find out how to send it back to us.
View Returns Information